Inicio
cable audio rca
Pro Audio RCA Male to Blunt 24 AWG Cables - Custom Cable Connection

Pro Audio RCA Male to Blunt 24 AWG Cables - Custom Cable Connection

4.5 (708) · € 11.99 · En stock

RCA Male to Blunt cable. Rack wiring patch cable is a practical solution to reduce contractor costs and rack wiring time. Just plug them in, run the blunt end to the correct length, cut and terminate. This unique system reduces rack wiring time substantially. Flexible 24 AWG Audio Wire Pinout: White to Center Pin, Black and Shield to Ground Pin Uses Our CCCM242 Mic Cable Rean NYS373-0 RCA Connector - black shell, gold plated contacts, rubber boot for best anti-kink protection, chuck type strain relief for cable O.D. 3.5 to 6.1 mm Features: High performance Mono Microphone Cable 24 AWG with 95% spiral shield. PVC Black JacketShield: Bare annealed copperCapacitance: 21 pF/ft. @ 1 kHzCharacteristic Impedance: 70 Ohm NOMINALD.C. Resistance @ 20°C: 23 Ohm/1000'Gold Plated RCA MaleAssembled in Dallas, TX by Custom Cable ConnectionDon't see the length you are looking
Our 1/4 inch TRS cables allow your signal to be quiet, eliminating frustrating hums, buzzing, and crackles. These cables make an excellent interconnect cable for any 1/4 balanced line cable. This cable is a popular choice for lineout into soundboards, powered speakers and for use in touring and other live-sound applications. This cables flexible design eliminates kinks and twists for a tangle-free performance.
Features:

High performance Balanced Microphone Cable 24 AWG with 95% spiral shield.

PVC Black Jacket

Shield: Bare annealed copper

Capacitance: 21 pF/ft. @ 1 kHz

Characteristic Impedance: 70 Ohm NOMINAL

D.C. Resistance @ 20°C: 23 Ohm/1000'

Gold Plated 1/4in Male Stereo Rean NYS228BG Connectors

Assembled in Dallas, TX by Custom Cable Connection

Pinout

Tip : Red

Ring : Blue

Shield : Shield

Don't see the length you are looking for, we will build it for you!

For a custom length quote, call: 866.770.3207 or email: sales@

Our 3.5mm Stereo Male (TRS) to 1/4 inch Stereo Male (TRS) Cable is designed to interconnect audio devices with stereo and mini stereo phone jacks. It is ideal for use in a variety of professional and consumer applications.

Typical Applications:

Audio connections between multimedia devices.

Connect your iPod, laptop, or similar device to a mixing console, home theater devices, and amplifiers.

Works with any devices standard 3.5mm aux Jack, such as iPad, iPhone, iPods, MP3 players, Laptops, PCs, Cell Phones, Tablets, Home theater, speakers etc

Features:

2 Conductor, 24 AWG, stranded bare copper, polypropylene insulated, aluminum/polyester tape shield, PVC jacketed installation microphone wire

3.5mm Male Stereo Solder Plug, Nickel plated with strain relief

1/4 Plug with 3 Conductor Nickel Shell Solder Contacts

Don't see the length you are looking for, we will build it for you!

For a custom length quote, call: 866.770.3207 or email: sales@

Custom Cable Connection balanced Neutrik microphone cables are a great choice for custom pro audio hookups to connect microphones to PA amplifiers, mixers or extension cords. These hookups are balanced, which helps cut out noise and hum pickup. A balanced line consists of three paths of current flow, using a pair of twisted wires with a shield covering them. The twisted pair would carry the actual audio signal while the overall shield acts as a noise absorbing barrier. The shield is typically connected to ground.

The outer jacket is constructed from a durable, ultra-flexible matte black PVC compound. O.D.: .210

24-gauge bare copper conductors

Connectors: XLR Male Plug to XLR Female Jack

Rugged Nickel Plated XLR Connectors with Strain Relief

Neutrik NC3MXX and NC3FXX Connectors

Our 1/4 inch TRS cables allow your signal to be quiet, eliminating frustrating hums, buzzing, and crackles. These cables make an excellent interconnect cable for any 1/4 balanced line cable. This cable is a popular choice for lineout into soundboards, powered speakers and for use in touring and other live-sound applications. This cables flexible design eliminates kinks and twists for a tangle-free performance.
Features:

High performance Balanced Microphone Cable 24 AWG with 95% spiral shield.

PVC Black Jacket

Shield: Bare annealed copper

Capacitance: 21 pF/ft. @ 1 kHz

Characteristic Impedance: 70 Ohm NOMINAL

D.C. Resistance @ 20¬∞C: 23 Ohm/1000'

Neutrik Connectors: NP3RX and NYS228

Assembled in Dallas, TX by Custom Cable Connection

Don't see the length you are looking for, we will build it for you!

For a custom length quote, call: 866.770.3207 or email: sales@

Flexible 24 AWG Audio Wire

Pinout: White to Center Pin, Black and Shield to Ground Pin

Uses Our CCCM242 Mic Cable

Rean NYS373-0 RCA Connector - black shell, gold plated contacts, rubber boot for best anti-kink protection, chuck type strain relief for cable O.D. 3.5 to 6.1 mm
Features:

High performance Mono Microphone Cable 24 AWG with 95% spiral shield.

PVC Black Jacket

Shield: Bare annealed copper

Capacitance: 21 pF/ft. @ 1 kHz

Characteristic Impedance: 70 Ohm NOMINAL

D.C. Resistance @ 20°C: 23 Ohm/1000'

Gold Plated RCA Male

Assembled in Dallas, TX by Custom Cable Connection

Don't see the length you are looking for, we will build it for you!

For a custom length quote, call: 866.770.3207 or email: sales@